*********************************************************************************
Ionic-Colloidal Silver Generator and Plant Growth Stimulator
[New! MODEL #: ZBB5]
**********************************************************************************
New Model ZBB5 features include:
-New streamlined unit.
-Built-in Constant-Current Circuit for the Ionic/Colloidal Silver Output.
-Yellow LED Light indicates when the current through the stimulator electrodes is correct and functioning.
-Special DIN style jack to comply with new government regulations.
-Soft carrying case
Each Silver Pulser is a professionally designed quality unit, thoroughly tested on an oscilloscope, and is guaranteed to operate per the specifications. (Click HERE to see the original Bio-Protocol schematic or HERE for the improved schematic. NOTE: Our Silver Pulser has a more advanced and proprietary circuit than what is shown here.)
The Silver Pulser is a dual function unit 1) Bio-Stimulator and 2) Ionic/Colloidal Silver Generator with Constant-Current.
The Silver Pulser uses only the highest quality .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Wires is on file, and can be viewed by clicking HERE. Our Certificate of Compliance for Silver Wire Purity is on file, and can be viewed by clicking HERE.
The Silver Pulser generates the finest quality Ionic Colloidal Silver at a rate of 3-5 ppm (part per million) in 2 Hours for 16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope). The ZBB5 Model has a built-in Constant-Current Circuit for the ultimate in Ionic/Colloidal Silver Production.
The Silver Pulser has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31 VOLTS DC peak per cycle.
For those owning the previous Model ZBB1-4, check our Products page for upgrading to the new ZBB5. Unique Features:
The Bio-Electric Protocol has changed. SOTA boosted the output voltage from 27 Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A new intensity control was specified to help widen the band of the output control to avoid "bunching" the signal near the high end of the control knob.
A unique circuit design allows The Silver Pulser to operate from a single 9 Volt alkaline battery. Original plans actually called for the use of 7 batteries in the design. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Pulser.
Constant-Voltage Output - Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall adapter, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will maintain the 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.
We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production.
Constant-Current Output - ZBB5 Model has built-in Constant-Current Circuit for Ionic/Colloidal Silver production.
Output monitoring circuit and indicator.
The Bio-Stimulator Probes are of the highest quality copper.
Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.
All electrical wire connections made with Food Grade solders and fluxes for the highest in safety and purity.
3 Year Parts and Labour Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and Probes are available.
The Unit:
The Silver Pulser is housed in an attractive new custom plastic enclosure with a built-in compartment for the 9 Volt battery. A slide-off lid allows you to change the battery easily. A Thumbwheel Switch Control Knob turns The Silver Pulser on and off and varies the intensity of the "Bio-Stimulator Probe" output.
A Green LED Light comes on when the Silver Pulser is turned on.
A flashing Yellow LED light on the unit indicates there is a correct Bio-Stimulator output and comes on only when current is flowing.
An Orange LED light is used for the Ionic-Colloidal Silver generation. The Orange LED Light comes on only when current through Silver Wires is correct and the circuit is complete.
A Red LED Light indicates low battery.
The Silver Pulser has one 6 pin DIN style jack for plugging in the Fine Silver Wires and for the copper Bio-Stimulator Probes. A second jack is used for hooking up an AC-DC Wall Adaptor so you don't have to go through batteries. NOTE: You cannot power the unit with a wall adaptor at the same time as using the Bio-Stimulator output. This is a government regulatory stipulation. However, a wall adaptor can be used for Silver production only.
We include Cotton Sleeves to put over the Bio-Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel for better conductivity!)
The Silver Pulser is packaged in a custom soft carrying case for easy storage.
Electronics:
The Silver Pulser is designed to the highest standards. We have improved on the design with added features. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source to save on batteries when making Ionic/Colloidal Silver, such as an AC-DC Wall Adaptor which you can purchase from any electronic store.
Specifications:
* Battery Voltage: 9 Volts DC (Alkaline Battery)
* Optional Input Voltage: 6 - 12 Volts DC @500mA Wall Transformer/Adaptor, Automobile Battery, or Solar Panel.
* Output Voltage at Colloidal Silver Wires: 31 Volts DC, (+/- 1 Volt) Constant-Voltage Output
* Output Current at Colloidal Silver Wires: 1.5 milliamps (+/- 0.5ma) Constant-Current Output
* Ionic-Colloid Silver Production: 3 - 5ppm (parts per million) for 2 hours for 16 ounces distilled water.
* Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
* Ionic-Colloid Silver Colour: Clear or Pale Gold.
* Silver Wire Life: Can make many gallons ionic/colloidal silver per set of Fine Silver Wires, when made as directed.
* Output Voltage at Copper Stimulator Probes: 31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic at ~3.92 Hertz (cycles per second) +/- 1 Hz. To see the actual output waveform from the oscilloscope, please click HERE. Note the extremely square and symmetrical waveform; free of any spikes or artifacts.
* Output Current at Copper Stimulator Probes: ~12 milliamps maximum when probes shorted and Control Knob on full intensity.
The Fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 8" long (1.5 mm diameter x 20.3 cm long) and are constructed of only Pure Fine (.9999 pure) Silver Wire.
Bio-Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long) and are constructed of heavy copper.
Weight of The Silver Pulser unit is only a few ounces - very lightweight.
Each Silver Pulser comes complete with:
The Silver Pulser unit
* Operating Instructions
* Two (2) .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes
* One (1) Silver Wire Holder
* One (1) High Grade Copper Plated Bio-Stimulator Probes
* Two (2) Velcro®/Neoprene® Straps
* One (1) Velcro® Arm Strap
* One (1) Scotchbrite® scrubber pad
* One (1) 2 oz. Dark Glass Dropper Bottle
* Six (6) Cotton Probe Sleeves
* One (1) 9 Volt Alkaline Battery
* One (1) Soft Carrying Case
* 3 Year Parts and Labour Warranty on internally mounted components
International Voltage (220 or 240 Volt Mains) Requirements:
The Silver Pulser can be operated by an external power source like an AC-DC Wall Adapter, Automobile Battery, or Solar Panel. If you wish to power the Silver Pulser with a wall transformer, your options are:
1. Purchase SOTA's International & Universal Wall Adapter. Please call for details.2. Purchase a local Wall Adapter with: Input 220VAC or 240VAC, 50 Hz Mains, 6-12 Volt DC output, 500mA (milli-amps) or more, Centre Positive, 2.1mm Plug.
3. Additionally, the Silver Pulser may also be operated directly from a 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug. Radio Shack® usually has these adapters.
| Disclaimer Regulators in the Medical Device department of Health Canada have indicated both verbally and in
writing, that our units can be sold only as consumer products not as
medical device. It is with this understanding that we are fulfilling your orders. |
| The Silver Pulser has a full 3 Year Parts and Labour Warranty on all internally mounted components. New Silver Wires, and/or Plant Stimulator Probes can be ordered through us. |
| Price: US$ 210.00
Or Call toll free in North America 1-800-579-5099 or Fax: 1 + (250) 339-0286 Or write to :
We accept |
The Bio-Tuner is an electronic relaxation system. Micro–current energy pulses appear to have a profound balancing effect on the individual and tends to produce a state of overall relaxation and well being.
********************************************************************
Please click HERE for our Frequently Asked Questions (FAQ's)...
| Disclaimer :All information is not to be used to replace proper Medical advise. All products are not to be used to replace Medication or treatment. All information and Products are to be used in the context of proper Scientific Medical study. Please conform to this Legality. |
